What you need first
- Your trunk details: SIP server address, port, and either a username and password or confirmation that your public IP is allowed
- The DID numbers on the trunk, in the format the provider sends them
- Admin access to the 3CX management console
- The caller ID you are entitled to present on outbound calls
1. Add the trunk
In the 3CX management console, add a new SIP trunk (under Voice & Chat in current versions) and choose the generic SIP trunk template rather than a named provider. Enter the registrar or proxy address, the authentication ID and password if you use registration, and the main trunk number.
2. Map your DID numbers
Add every DID number on the trunk and set where each one should ring: an extension, a ring group, a queue or a digital receptionist. Check the format: if your provider sends numbers in international format (for example with the country code) and 3CX expects something else, inbound calls will not match their rule.
3. Outbound rules and caller ID
Create an outbound rule that sends the destinations you call through the new trunk. Set the outbound caller ID per trunk or per extension to a number you own. Block premium-rate and international ranges your business never calls; it costs nothing and removes the biggest fraud risk.
4. Firewall and network
3CX includes a firewall checker. Run it after adding the trunk. Allow SIP only from your provider's addresses, and make sure the RTP media ports are forwarded, or calls will connect with no audio in one direction.
One-way audio: common causes5. Test before go-live
- Call every DID from a mobile and confirm it rings the right place
- Make outbound calls to a landline and a mobile and talk for at least a minute
- Check the caller ID shown on the phone you called
- Navigate an IVR with keypad tones to confirm DTMF works